4
INSTALLATION:
2. Power ON / OFF
• Insert the tracker to OBD socket, the tracker will power on automatically.
• When tracker is removed from the OBD socket, then the tracker will send
power down alarm to server, the built in battery can work about 0.5-1
hours, later the tracker will power off automatically.
3. Tracker Installation
The tracker is easy to install, just insert the tracker to the OBD socket.
The OBD socket is normally under the car panel of the driver seat.
4. Antenna
The Antenna of 2G/3G/4G and GPS are built in the tracker.
Large metal objects and car panel will reduce the GSM and GPS signal. the
GPS antenna need faced to sky& can not face to ground, otherwise the GPS
signal will be weak and maybe can not located, if can not locate insert to
OBD interface, you need connect a external OBD wire to install the tracker
to other place.
GPS Antenna
To Next Page
Loading...