EasyManua.ls Logo

Nextech OBD II - Factory Reset and Working Temperature

Nextech OBD II
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
INSTALLATION:
5. Reset to Factory Settings (Default configuration)
Sending SMS (factory*12345678) to the tracker will delete all user setting
and back to factory configuration and repower on.
6. Working Temperature
The working temperature is -20°C to 60°C, over this range the product may
not function as normal. The storage temperature can reach to -40°C to 80°C.
Note:
After a factory reset, all IP / APN / internet/ Language / Timezone / Alarm
Setting etc are deleted, just like a new product, all authorized phone
numbers are deleted and password change to 123456, all the alarm settings
are canceled, if the IP/APN/internetname & password are changed, users
need set these again by sending SMS.

Related product manuals