To ensure the camera is able to function in Motion detection
Mode, please keep it powered with a mobile power bank or
hardwire it directly to the car battery. We do not recommend
running the camera continuously for more than 10 hours
especially in an extreme weather.
Enable
-Auto LCD off
This feature avoids any chance of the screen being a distraction
in the vehicle, especially at night when the illumination from
the LED screen can be a nuisance or even a hazard to the
driver. The default setting is Off.
this function, the camera’s LCD will light off after a few
minutes but the recording will continue with red light blinks.
You can press any button to light on the screen.
Event Recording
Critical event detection is triggered by the G-Sensor (Gravity
Sensor) and will auto-detect vehicle impacts and collisions.
This will cause the camera to protect the current video clip
from being overwritten by locking it and saving the footage in
the “Event” folder.
The G-Sensor sensitivity is adjustable with On or Off – it is set
to Off by default.
Event videos are stored in the “Event” folder, and cannot be
automatically overwritten.
The camera will start auto recording,once the camera detects
any movements around the car.
Owing to the 360 degree camera lens,makes the motion
detection the same as 360 degree detection area around
the car horizontally.
To Next Page
Loading...
