The camera will not auto get out of time lapse recording
mode next time when the camera is turned off and back
on.
-Time Lapse:
If TIME LAPSE is selected, the camera will take the video at
the set time interval – either 4,8,12 hours – to create a
video montage. For example, if you choose 4 hours, the
recording will be 1 sec produce 1 fps video to create a full
video up to 4 hours.
You have to set it back to normal recording mode by
manually switch time lapse function off.
-Parking Monitor:
Parking Mode operates as a sentry function under different
situations.
To activate Parking Monitor, Press Menu button and
navigate to “Parking Monitor”,press OK and select Low,
Normal or High.
When the Parking Mode has been turned on, there will be
an icon (P) at the upper right of the screen. It will be
triggered by the motion collision to your car.
In Parking Monitor Mode, once the camera detects collision
to the car,it will start auto-recording; and then stop
recording after 20 seconds of inactivity.
-Motion Detect:
To activate Motion detect, Press Menu button and navigate
to “Motion detect”and then switch it to ON.
This function could be set together with Parking Monitor as
an advanced Parking security.
When Loop Recording is turned off, the camera will record
video in 30 minute clips, but will not overwrite old video
files when the storage card is full.
To Next Page
Loading...
