Nextech QV3866 - Basic Operation; Powering the Camera On and Off

3.3 Installing the camera onto your windshield
1. Attach the Suction Mount to the camera’s
Mount Connector, pushing it in until it fastens.
2.
3.
4.
5.
Thoroughly clean the windshield using water
or alcohol, and wipe clean with a dry cloth.
Securely attach the Suction Mount to the
windshield.
Connect the supplied Car Charger to the
Camera micro USB port carefully.
Insert the Car Charger into your vehicle’s
cigarette lighter port.
OK
M
GPSTF
USB
R
2. Please do not remove the card while the camera
is recording to prevent data loss/ corruption.
R
GP S
T
F