5
PRODUCT OPERATION:
Setting Description Option
Loop recording Use this option to set the
length of each video clip.
Ifyou choose the option ‘Off’
then the recorder will not
loop record and the files will
not be overwritten on the
micro SD card.
Off/1min/3min
/5min
Date & time Change the date & time by
using the relevant UP and
DOWN keys, and then press
OK/confirm to confirm
setting.
Can be set:
year, month,
day, hour,
minute
License plate setting Edit the car plate stamp. Use
the UP/DOWN keys to select
a number or an alphabet and
press confirm to save the
setting.
Time zone Set the correct time zone for
the GPS to get the correct
time settings for the device.
Language Default language is English English/
Chinese/
French/
Spanish/
German/Italian
Format SD Use this option to format
the SD card. (All files will be
permanently erased.)
Confirm/
Cancel
Flips video image
(mirror)
Default setting is off. Off/on
Reset system Resets the device to factory
settings. Note that restoring
defaults will not erase data on
the SD card
Confirm/
Cancel
Motion detection Enable this setting to allow
the unit to record only when it
detects movement.
Off/low/
middle/high
About Display the device firmware
version.
To Next Page
Loading...
