Need help?Do you have a question about the Nexus NX Sea Data and is the answer not in the manual?
General| Category | Marine Equipment |
|---|---|
| Type | Data Logger |
| Manufacturer | Nexus |
| Model | NX Sea Data |
| Power Supply | 12-24V DC |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | 0-95% RH (non-condensing) |
| Communication Interface | RS-485, Ethernet |
Steps for mounting the instrument using templates and drilling holes for connection.
Process of setting a logical ID number for the instrument on the Nexus Network.
Displaying boat speed through the water in various units.
Includes TRIP LOG, TOTAL LOG, TIMER, AVERAGE/MAXIMUM SPEED, DEPTH, BATTERY, TEMPERATURE.
Displaying actual depth relative to keel or water surface in different units.
Covers LIGHT CONTROL, SHALLOW ALARM, DEPTH ALARM, ANCHOR ALARM, BOAT SPEED, Barometric pressure.
Covers returning to normal mode, setting speed units and calibration values.
Recommendations for cleaning, checking connections, and protecting the instrument.
Steps to take before contacting a dealer for troubleshooting.
Common causes of electronic faults, focusing on installation and connections.
Specific actions for 'No reading' or irregular values in speed/distance and wind.
List of common error messages and their meanings.
To Next Page
