EasyManua.ls Logo

Nexus NX2 Wind Data User Manual

Nexus NX2 Wind Data
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
- Instrument -
Installation and Operation Manual
WIND Data
performance by NEXUS NETWOR
K
English

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Nexus NX2 Wind Data and is the answer not in the manual?

Nexus NX2 Wind Data Specifications

General IconGeneral
Wind Angle Accuracy+/- 2 degrees
Measurement Range0-360°
ResolutionWind speed: 0.1 m/s, Wind angle: 1 degree
OutputNMEA 0183
Housing MaterialUV-resistant plastic

Summary

Part specifications

Additional in Wind Data complete with transducer

Lists optional components for the complete wind data package.

Registering of this product

Instructions and benefits of registering the product with the distributor.

Installation

Installing the instrument

Step-by-step process for physically installing the NX2 Wind Data instrument.

Installing cable

Details on connecting the power cable and its fuse requirements.

Connections in Nexus Network

How to connect the transducer to the NX2 Server in a Nexus Network.

Connection of log transducer

Instructions for connecting a separate log transducer to the Wind Data instrument.

First start (only in a Nexus Network)

Initialising the instrument

Procedure for the initial setup and assigning a network ID to the instrument.

Re-initialising the instrument

Steps to reset the instrument's network ID if there are conflicts.

Operation

About this manual

Explains manual conventions, software version compatibility, and optional functions.

How to use the 5 push-buttons

Details the function of each of the five push-buttons on the instrument.

Main function

Describes the primary data displayed, such as Apparent/True Wind Angle/Speed.

Analogue function

Explains how to change the wind scale and interpret analogue display modes.

Sub-functions

Details additional data displays like AWS, TWS, VMG, Battery voltage, etc.

More functions in a Nexus Network

Covers advanced functions available when connected to a Nexus Network.

Calibration

C10 User settings

Accesses user-configurable settings like dampening and main information display.

C20 Calibration of Log

Procedures for calibrating the log transducer and setting speed/temperature units.

C30 Compass Settings

Settings for true/magnetic course, magnetic deviation, and compass reference.

C50 Wind Settings

Configuration for wind angle, speed units, calibration table, and angle adjustment.

C70 Configure NX2

System configuration settings, including master settings and terminal functions.

Maintenance and fault finding

Maintenance

Guidelines for cleaning, protecting, and storing the instrument and transducers.

Fault finding

Steps to diagnose and resolve common issues before contacting a dealer.

Specifications

Technical specifications

Details dimensions, power, temperature range, weight, and enclosure properties.

Nexus Network introduction and user policy

Overview of the Nexus Network data bus and its user policy.

Optional Accessories

Abbreviations

WARRANTY

Related product manuals