WIND DATA
4-13
5 Operation
5.1 About this manual
• Each time a push-button are referred to in this manual, the
push-button name will appear in bold and CAPITAL letters, e.g.
PAGE.
• Unless otherwise stated, the push-button presses are
momentary.
• Each time a function is mentioned in the text, it will be in
brackets and in the same format, where possible, as displayed,
e.g. [AWA].
• This manual has been written to be: Compatible with Wind Data
instrument from software version 1.0.
• All functions followed by the text option is not valid in a factory
set-up instrument. See calibration to be able to display these
functions.
Note!
We have put in a lot of effort in order to make this manual correct
and complete. But since we continuously make our products better,
some information can differ from the products functions. If you need
further information contact your national distributor
To Next Page
Loading...
