CLOCK ALARMS
SETTING THE ICE WARNING ALARM (PRE-AL)
If Weekday (W) or Single day (S) alarm is set, the Ice
Warning Alarm (Pre-AL) can be programmed.
• Press ALARM button once to enter into the Ice Warning
Alarm setting mode. The abbreviation OFF with a PRE-AL
next to it will be displayed.
• Press and hold ALARM button for two seconds. The
number 30 will ash, meaning that if selected, the alarm will
sound 30 minutes prior to the Weekday or Single alarm.
• Select the desired Ice Warning Alarm interval in 15 minutes
increments between 15 and 90 minutes, using UP (▲) or
DOWN (▼)buttons.
• Press ALARM button to conrm and exit from the alarm
setting mode.
ACTIVATING/ DEACTIVATING ALARMS
• Press ALARM button to enter into the desired alarm mode.
• Press UP ( ▲) to activate alarm and the corresponding
icons W, S or PRE-AL will be displayed.
• Press DOWN ( ▼) to deactivate alarm until “OFF” is
displayed.
23
To Next Page
Loading...
