REMOTE TEMPERATURE AND
HUMIDITY SENSOR
FEATURES
• Remote data transmission to the main unit via 433 MHz
frequency
• Selection of the temperature unit in Celcius or Fahrenheit
(default setting is Fahrenheit)
• Three transmission channels
• Can be wall mounted using built-in hanger
A. LED INDICATOR
• Flashes once about every 45 seconds with each
transmission to the main unit.
• Flashes twice when battery power is low.
B. BATTERY COMPARTMENT
• Requires two AA-size batteries (not included)
C. RESET
• Reset all previous settings
D. CHANNEL SWITCH
• Select the desired channel: 1, 2 or 3
E. WALL-MOUNT RECESSED OPENING
• Mount the remote sensor on the wall
F. °C/°F SWITCH
• Select the temperature unit in Fahrenheit or Celcius
5
A
To Next Page
Loading...