PLACEMENT
• The remote sensor should be placed under eaves or
a similar location with free air circulation sheltered from
direct sunlight and extreme weather.
• Ideally, place the remote sensor over soil, rather than
asphalt which would cause false readings.
• Avoid placing the remote sensor near sources of heat,
such as chimneys and heating elements.
• Avoid areas that collect heat from the sun and radiate
heat, such as metal, brick or concrete structures, paving,
and patios.
• The international standard for valid air temperature
measurements is 1.25meters (4 feet) above the ground.
OPERATION
Once batteries are installed, the remote sensor will start
transmitting temperature and humidity data to the main
unit.
7
To Next Page
Loading...
