NGS SKY CHARM - Bluetooth Mode; Aux Mode

USER’S MANUAL
4
BLUETOOTH MODE
• TurnonthespeakerandthenswitchtoBluetoothmode:the
“Bluetooth mode” prompt tone will sound and the indicator
will ash in red. Keep the speaker and Bluetooth-enabled
device within a radius of ten metres.
• SetyourmobilephonetosearchforBluetoothdevices.
• WhentheBluetoothenabledndsthespeaker,select“NGS
SKYCHARM” from the list of found devices.
• Ifrequired,enterthepassword“0000”.
• Aftersuccessfullybeingpaired,BTwilllightuponthedisplay.
AUX MODE
USB PLAYBACK MODE
• Keeptheunitpoweredon.Plugoneendofthe3.5mmAUX
cord to the headphone jack on your device.
• Plugtheotherendofthe3.5mmAUXcordintotheAUXjack
on the speaker.
• Usetheconnecteddevice’saudiocontrolsformusicplayback.
• Turnontheunit.PushUSBdiskwithMP3music(s)intoUSB
port, it will switch to USB Playback Mode and then start to play
music automatically.