To Next PageTo Next PageWhat to do if the NGTeco Time Clocks does not authenticate my fingerprint?
To resolve fingerprint authentication issues on your NGTeco Time Clock, ensure you place your finger correctly on the scanner. Also, check that your finger is clean and free of cuts or stains. If the enrolled finger has flaws, consider enrolling a different finger.
What to do if I lost my PIN for NGTeco Time Clocks?
If you've lost your PIN for the NGTeco Time Clocks, reach out to the Administrator to have it changed. If you've lost the Admin PIN, you should contact the supplier.
What to do if I lost my Admin credentials for NGTeco Time Clocks?
If you have lost your Admin credentials for the NGTeco Time Clocks, you should contact another Admin to reset your credentials, or contact the supplier for further proceedings.
Details the process of capturing and saving a user's fingerprint for authentication.
Explains fingerprint and password verification methods for check-in/out and admin access.
Covers administrator privileges for protecting configurations and managing the clock.
Guides on adding new users to the time clock, including entering details and enrolling.
Details how to edit existing user data, including details, fingerprints, passwords, and permissions.
Details how to set attendance rules like maximum work hours, auto punch, and day cutoff time.
Explains how to track daily attendance, individual user attendance, and add missing punches.
Details manual Wi-Fi setup, connecting to existing networks, and adding new ones.
General| Fingerprint Capacity | 3000 |
|---|---|
| Record Capacity | 100000 |
| Communication | TCP/IP, USB |
| Operating Temperature | 0°C- 45°C |
| Humidity | 20% to 80% |
