NHC Solace - SECTION 4: OPERATION; Overview of Bed Controls and Their Functions

To Next Page

To Previous Page

Group ltd

Overview of Bed Controls and Their Functions

SECTION 4: OPERATION

Backrest Adjustment: Use the designated buttons on

the control handset to adjust the angle of the backrest.

Footrest Adjustment: Use the specied buttons on the

control handset to adjust the angle of the footrest.

Seat Function: Activate the ‘Seat’ position, which

simultaneously adjusts both the backrest and footrest,

by pressing and holding the button on the handset

marked with an upward arrow until the desired position

is reached.

Mattress Platform Elevation: To elevate the mattress

platform, press and hold the button on the handset

marked with an upward arrow until the desired height

is reached.

Mattress Platform Lowering: To lower the mattress

platform, press and hold the button on the handset

marked with a downward arrow until the desired height

is reached.

Trendelenburg Adjustment: For a forward or reverse

tilt (Trendelenburg position) of the bed, use the

Forward/Reverse tilt buttons on the handset. Ensure the

bed’s end does not contact the wall when adjusting to a

reverse tilt position.

CPR Function: The handset also includes a CPR

function for emergencies. This feature quickly attens

the bed to facilitate CPR. Activate by pressing the CPR

button on the handset.

Control Lock: The locking mechanism, located on the

reverse side of the control handset, requires a key to

activate or deactivate. This safety feature ensures the

bed conguration remains unchanged and prevents

unintended adjustments.

IMPORTANT: Always ensure the occupant is safely

positioned away from the bed’s edges and secure from

falling when adjusting the mattress platform’s position.