Group ltd
9
SECTION 3: UNPACKING AND ASSEMBLY
Once you have veried the presence of all tools and parts, you can proceed to the assembly
instructions provided in the next section of this manual. If you encounter any issues or have
questions during the unpacking or assembly process, do not hesitate to reach out to our
customer support team for guidance and assistance.
Step-by-Step Assembly Instructions
STEP 1
STEP 4
STEP 7
STEP 2
STEP 5
STEP 8
STEP 3
STEP 6
Fitting the Castors
Before tting, ensure the castor
brakes are locked to prevent
castor spinning.
Fit each castor securely into the
designated slots at the bed’s
base.
Once all castors are in place,
unlock the castor brakes.
Fitting the Connecting Bars
Position the Backrest and Footrest
on the mattress platforms
upright.
Insert the bolt into the bed frame,
then slide the bar into place and
secure it by tightening the thumb
screw and bolt with the Allen Key.
Tilt the mattress platform with
the attached connector bars onto
its side.
Align and slide the connector
bars into the slots on the opposite
mattress platform.
Secure each connection rmly
with bolts.
To Next Page
Loading...