NHC Solace - Attaching the Headboard and Footboard; Connecting the Actuator Motor, Handset and Power

Group ltd
10 11
SECTION 3: UNPACKING AND ASSEMBLY
STEP 9
STEP 12
STEP 15
STEP 10
STEP 13
STEP 16
STEP 11
STEP 14
STEP 17
Attaching the Headboard and Footboard
Connecting the Actuator Motor, Handset and Power
Open out the footrest and backrest
on the mattress platforms to a free-
standing position.
Lift the mattress platform slightly.
Carefully insert the metal prongs
on the headboard into the
corresponding slots on the platform.
Secure the headboard by rst
tightening the thumb screw,
then the bolt with the Allen key.
Note: The footboard and headboard are interchangeable.
REPEAT STEPS 10 & 11 to attach and secure the footboard in the same
manner.
Uncoil the wires on the headboard
and footboard.
Connect the colour-coded wires
to the matching colour-coded
sockets on the actuator motor.
Connect the wire from the
headboard to the white-coded
socket, and connect the wire from
the footboard to the blue-coded
socket.
Connect the handset to the socket
marked with the handset icon.
Encase the wires in the wire
casing to protect and neatly
secure them.
Plug the main power cable
into the designated port on
the motor and cover it with the
protective cap.