SYSTEM MAINTENANCE:
Except for the occasional flattering comment, your M-00's need no regular maintenance. Never attempt to clean
the M-00's driver units except for very light feather dusting. The M-00 cabinet can be cleaned using a moist
soft cotton cloth. Avoid silicone or oil-based cleaners or treatments.
SYSTEM OPERATION:
Although the M-00's were designed to handle a wide range of listening levels, every speaker has its limits.
Harsh breakup at extremely high levels is an indication that your monitors have exceeded their output limits.
Excessive equalization can worsen the problem. Protect your ears and use common sense, if you hear continuos
distortion or feel heat emanating from the drivers, reduce the gain. Speaker damage most often occurs from
sustained high volume levels, not from transient sounds or brief musical peaks.
NEED HELP?
Technical Support can be reached several ways:
Telephone toll free: 800-NHT-9993 (648-9993),
Email us at: tech@nhtpro.com,
Fax us at: 707-748-5945
Write us at: NHTPro
527 Stone Rd.
Benicia, CA 94510.
SPECIFICATIONS:
Type: Integrated, self-powered near/midfield monitor.
Configuration: 2-way acoustic suspension.
Woofer: 4.5" treated paper.
Tweeter: 1" soft fabric dome.
Magnetic Shielding: Full.
Amplifier Power: 75W (continuous rms), 150W (100ms peak).
Peak Acoustical Power: 111dB SPL (100 ms pink noise @ 1M).
Residual hum/noise: <20dB SPL (A weighted @1M)
THD @ 90dB SPL: <1.0% (100Hz ~10kHz @ 1M)
Response +/2dB: 98Hz ~ 20kHz@1M, 93Hz ~20kHz@2M.(1/3 oct. swept noise)
6dB LF Cutoff: 80Hz (in-room response).
Monitor Dim./Wgt: 9"h x 5.7"w x 7.3"d/14lbs.
Enclosure Materials: Cast Aluminum/Zinc alloy body, Glass-filled ABS baffle.
Features/Controls
Input Connectors: XLR, TRS, Phono.
Input Sensitivity: 10dB, +4dB.
Listening Position: near-field/mid-field.
Auto Power: On, Off.
Master Power: On, Off.
To Previous Page
Loading...
Need help?
Power
Audio Specifications
Weight and Dimensions
