Need help?Do you have a question about the NI 6343 and is the answer not in the manual?
General| Analog Inputs | 32 |
|---|---|
| Resolution | 16 bits |
| Maximum Sample Rate | 500 kS/s |
| Analog Outputs | 4 |
| Output Range | ±10 V |
| Digital I/O | 48 |
| Counter/Timers | 4 |
| Bus | USB |
| Connectivity | USB |
| Operating Temperature Range | 0 °C to 55 °C |
| Input Range | ±10 V, ±5 V, ±1 V, ±200 mV |
Provides essential safety information for operating NI 63xx X Series devices and modules.
Describes the DAQ hardware, including the DAQ-STC3 digital engine and its features.
Describes the analog input circuitry and components for MIO X Series devices.
Details the differential, referenced single-ended, and non-referenced single-ended input settings.
Covers software-timed and hardware-timed acquisition methods, including buffered and single-point operations.
Explains the three analog input triggering actions: start, reference, and pause triggers.
Summarizes recommended input configurations for floating and ground-referenced signal sources.
Details the timing signals for analog input, including AI Sample Clock and AI Convert Clock.
Explains the counter timing engine and the clock sources for sample-clocked operations.
Lists various counter input applications like edge counting, pulse-width, and frequency measurements.
Describes how to measure the high and low time of a pulse using counter Gate input.
Details methods for measuring frequency, including low, high, and reciprocal frequency measurements.
Lists applications for counter output, including pulse train and frequency generation.
Details the various counter timing signals like Source, Gate, Aux, and Sample Clock.
Explains how to generate triggers using digital signals like PFI, RTSI, or PXI_STAR.
Describes generating triggers on analog signals and the analog trigger circuit.
To Next Page
