Need help?Do you have a question about the NI 6363 and is the answer not in the manual?
General| Resolution | 16 bits |
|---|---|
| Output Range | ±10 V |
| Digital I/O | 24 |
| Counter/Timers | 4 |
| Analog Output Resolution | 16 bits |
| Digital I/O Channels | 24 |
| Analog Inputs | 16 |
| Analog Input Channels | 16 |
| Sampling Rate | 1 MS/s (aggregate) |
| Operating Temperature Range | 0 °C to 50 °C |
| Input Range | ±10 V, ±5 V, ±1 V, ±0.2 V |
Essential safety precautions and warnings for operating NI X Series devices and modules.
Steps for installing the DAQ device, including software and hardware setup procedures.
Overview of DAQ hardware, including common components and the DAQ-STC3 digital engine.
Detailed descriptions of signals found on the I/O connectors for X Series devices.
Explanation of analog input range settings and their effect on device resolution and accuracy.
Explanation of software-timed and hardware-timed generation methods for analog output.
Comparison of software-timed and hardware-timed acquisition methods for digital input.
Explanation of the counter timing engine and its clock source requirements for sample clocked operations.
Explanation of arm start, start, and pause triggers for counter operations.
How to route external timing signals to various X Series functions using PFI terminals.
Overview of the clock routing circuitry for X Series devices.
Overview of Direct Memory Access (DMA) and Programmed I/O for PCI Express/PXI Express.
How to configure triggers using digital signals, specifying source and edge.
How to generate triggers based on analog signals using APFI terminals or AI channels.
Troubleshooting common analog input issues like crosstalk and random readings.
To Next Page