Need help?Do you have a question about the NI 6341 and is the answer not in the manual?
General| Max Sample Rate | 500 kS/s |
|---|---|
| Output Range | ±10 V |
| Counter/Timers | 4 |
| Resolution | 16 bits |
| Operating Temperature Range | 0 °C to 50 °C |
| Input Range | ±10 V, ±5 V, ±2 V, ±1 V, ±0.2 V, ±0.1 V |
Essential safety precautions for operating X Series devices and modules.
Procedures for installing X Series DAQ devices and software, including unpacking.
Process for self-calibrating X Series DAQ devices for measurement accuracy.
How to program NI measurement devices using NI-DAQmx driver software.
Detailed descriptions of signals found on the I/O connectors for X Series devices.
Information on the +5 V power terminals, their ratings, and connector specifications.
Analog input circuitry and configuration for MIO X Series devices.
Explanation of analog input ranges and their effect on resolution.
Supported analog input ground-reference settings (DIFF, RSE, NRSE).
Software-timed vs. hardware-timed analog input acquisition methods.
Setting the analog output range and reference voltage.
Software-timed vs. hardware-timed analog output generation methods.
Supported analog output triggering actions such as start and pause.
Protection mechanisms for PFI signals against overvoltage and ESD events.
Resources for technical support, including web resources and training.
Common analog input issues like crosstalk and signal drift.
Resources for technical support, including self-help and software support.
To Next Page
