EasyManua.ls Logo

NI cDAQ-9174 - Safety

Default Icon
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© National Instruments Corporation 71 NI cDAQ-9178/9174 User Guide and Specifications
Safety
If you need to clean the chassis, wipe it with a dry towel.
This product is designed to meet the requirements of the following standards of safety for electrical
equipment for measurement, control, and laboratory use:
IEC 61010-1, EN-61010-1
UL 61010-1, CSA 61010-1
Note For UL and other safety certifications, refer to the product label or visit ni.com/
certification
, search by model number or product line, and click the appropriate link in the
Certification column.
Environmental
The NI cDAQ-9178/9174 chassis is intended for indoor use only. For outdoor use, mount the system in
a suitably rated enclosure.
Operating temperature
1
(IEC-60068-2-1 and IEC-60068-2-2) ....................–20 to 55 °C
Storage temperature
(IEC-60068-2-1 and IEC-60068-2-2) ....................40 to 85 °C
Ingress protection...................................................IP 30
Operating humidity (IEC-60068-2-56)..................10 to 90% RH, noncondensing
Storage humidity (IEC-60068-2-56)......................5 to 95% RH, noncondensing
Maximum altitude..................................................2,000 m
Pollution Degree (IEC 60664) ...............................2
Shock and Vibration
To meet these specifications, you must panel mount the NI cDAQ-9178/9174 system and affix ferrules
to the ends of the terminal lines.
Operational shock ..................................................30 g peak, half-sine, 11 ms pulse
(Tested in accordance with IEC-60068-2-27.
Test profile developed in accordance with
MIL-PRF-28800F.)
Random vibration
Operating .......................................................5 to 500 Hz, 0.3 g
rms
Non-operating ................................................5 to 500 Hz, 2.4 g
rms
(Tested in accordance with IEC-60068-2-64.
Non-operating test profile exceeds the requirements
of MIL-PRF-28800F, Class 3.)
1
When operated in temperatures below 0 °C, you must use the PS-5 power supply, or another power supply rated for below 0 °C.

Table of Contents

Related product manuals