Need help?Do you have a question about the NI myDAQ and is the answer not in the manual?
General| Analog Input Channels | 2 |
|---|---|
| Analog Input Resolution | 16 bits |
| Analog Input Range | ±10 V |
| Analog Output Channels | 2 |
| Analog Output Resolution | 16 bits |
| Analog Output Max Update Rate | 200 kS/s |
| Analog Output Range | ±10 V |
| Digital I/O Channels | 8 |
| Digital I/O Sample Rate | 1 MS/s |
| Counter/Timers | 1 |
| Power Supply Outputs | +15 V, -15 V, +5 V |
| Connectivity | USB |
| Power Supply | USB powered |
| Operating System Compatibility | Windows |
| Analog Input Max Sample Rate | 200 kS/s |
| Digital I/O Compatibility | TTL |
Introduces the myDAQ for iDaq component, its purpose, and the guide's scope.
Details the myDAQ component's capabilities, including signal acquisition types and analog channels.
Confirms correct installation of myDAQ and myDAQcquisition components in iDaq.
Step-by-step guide to add a myDAQ device to the list of active devices in iDaq.
Explains the myDAQ Selection Window and its options for connecting a device.
Details the options available in the myDAQ Device Editor for configuration.
Guides on configuring analog input acquisition, including audio signals and sampling rate.
Covers channel settings for DMM and analog inputs, including description and range.
Explains how to use the integrated 60V digital multimeter for measurements.
Details the DMM control window elements like measurement type, range, and acquired value.
Provides links to the product page, add-ons, support, and further information.
To Next Page
