NI LabVIEW User Manual

Getting Started with the LabVIEW Real-Time Module 2 ni.com
Figure 1. The LabVIEW Dialog Box
The LabVIEW Help contains VI reference information for all
Real-Time VIs.
3. Select Help»VI, Function, & How-To Help to open and explore the
LabVIEW Help.
The RT Module allows you to select the host computer or an RT target as
an execution target to run VIs built in LabVIEW. The LabVIEW dialog
box indicates the current execution target. The default execution target is
the development computer, or host computer. Refer to Chapter 2,
Connecting to RT Targets, of the LabVIEW Real-Time Module User
Manual for information about selecting execution targets.
When you select an RT target—an RT Series plug-in device or networked
RT Series device—as the execution target, the LabVIEW development
environment continues to run on the host computer but VIs run on the RT
target. Refer to Chapter 1, Introduction to the LabVIEW Real-Time Module,
of the LabVIEW Real-Time Module User Manual for information about RT
targets.

NI LabVIEW Specifications

General

Programming Language	G (Graphical Programming Language)
Operating System Support	Windows, Linux, macOS
Real-Time Execution	Yes
Hardware Integration	Yes (NI Hardware, Third-Party Hardware)
Parallel Execution	Yes
Data Acquisition	Yes
Control Design and Simulation	Yes
Signal Processing	Yes
User Interface	Graphical User Interface (GUI)
Deployment Options	Embedded Systems