Sub-Head
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455
www.nibco.com
11
www.nibco.com
AHEAD OF THE FLOW
®
PUSH ‘N GO
®
Installation Instructions
Step 1
Get your pipe and fitting ready to connect.
Step 2
Push pipe into the fitting until it stops and you’re done.
Features and Benefits
• Quick-connect fittings that can be used in potable water systems.
• Made of polyphenylsulfone which has been proven in extensive tests for cleanliness, pressure, flow,
longevity, chemical exposure and chlorine resistance.
• Works with plastic CTS tubing.
• No tools, crimp or solder required. Simply push pipe into fitting.
• Easy to disassemble - Push in gripper ring and pull out pipe.
• Available from 1/2” through 3/4”
• Locking clips available for behind the wall installation.
Performance Standards
ASTM F877 Cross-linked polyethylene plastic hot- and cold-water distribution systems
NSF-PW Combination of performance and health effects standards for fittings to be used with potable water
Our NIBCO Push ‘N Go fittings are designed for a quick and hassle-free installation. No tools, crimp or solder is required. These poly-
phenylsulfone fittings are sturdy enough to handle projects for plumbing systems and quick fixes. It is recommended that Push ‘N Go
fittings be used only with plastic CTS tubing. Disassembly is easy as well. Simply push in the gripper ring and pull out the pipe. No
special tool is required.
To Next Page
Loading...
Need help?
General