Quick guide
Navigation
Ok button (confirm/select)
Back button (back/undo/exit)
Control knob (move/increase/reduce)
A detailed explanation of the button functions can be found on page 7.
How to scroll through menus and make different settings is described on page 10.
INDOOR CLIMATE
HEAT PUMP INFO
HOT WATER
The mode for setting the indoor temperature is accessed by pressing the OK button twice, when in the start
mode in the main menu. Read more about the settings on page 12.
Increase hot water volume
2X
1X
To increase the amount of hot water temporarily (if a water heater is installed for your F1355), first turn the
control knob to select menu 2 (water droplet) and then press the OK button twice. Read more about the settings
on page temporary lux.
To Next Page
Loading...
