Need help?Do you have a question about the Nibe F1345 Series and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Control System | NIBE SMO 40 |
| Max Flow Temperature | 65°C |
| Cooling Capacity | Not explicitly stated in general specifications. Depends on the specific model and installation conditions. |
| COP | 4.5 |
| Electrical Connection | 400V 3N~ |
| EER (Cooling) | Not explicitly stated in general specifications. Depends on the specific model and installation conditions. |
| Number of Compressors | 1 or 2 (depending on model) |
Covers safety information, symbols, product marking, and precautions for safe operation.
Information on serial number, recovery, and environmental considerations for the product.
Procedures and checklist for inspecting the installation before commissioning.
Guidelines for transporting, lifting, and assembling the heat pump unit.
Details of supplied components and instructions for removing unit covers.
General diagrams and identification of major heat pump components and modules.
Explains the cooling sections and details the motor module (AA11) and its connections.
Overview of the pipe system, general installation requirements, and flushing procedures.
Specifies pipe dimensions and connection details for brine and heating medium circuits.
Detailed instructions for connecting the brine, heating medium, and hot water circuits.
Outlines various connection options and provides a key for system diagrams.
Covers general electrical installation, safety, circuit breakers, and cable routing.
Details on connecting the main power supply and internal terminal blocks.
Guides for connecting external sensors, pumps, and operating voltage for control.
Information on using AUX inputs/outputs for external control and optional connections.
Steps for preparing the system, filling, and venting the climate and brine circuits.
Guides for initial start-up, inspection, and adjusting pump speeds for optimal operation.
Lists accessories for communication, control, additional heating, and buffer vessels.
Includes accessories for humidity sensing, pool heating, room control, and solar integration.
Provides physical dimensions and setting-out coordinates for unit installation.
Comprehensive data on performance, electrical, refrigerant, and system operating parameters.
Information on energy labels, efficiency ratings, and detailed electrical wiring diagrams.
To Next Page
