Need help?Do you have a question about the Nibe F1145 5 and is the answer not in the manual?
Safety warnings, symbols, notes, and cautions for safe operation and maintenance.
Benchmark scheme, warranty, electrical, and heating system requirements.
Pre-commissioning checklist detailing required inspections for installation compliance.
Instructions for moving the unit and site preparation.
Procedures for assembly, cooling module removal, and accessing internal parts.
List of items included in the package.
Identifies major parts, connections, and components.
Details electrical cabinets, components, and the cooling section.
Covers pipe installation basics, system overview, and connection symbols.
Details pipe dimensions, brine side, and climate system connections.
Covers hot water, buffer vessels, ventilation, free cooling, and ground water systems.
Specifics for connecting pool heating accessory.
Covers safety, circuit breakers, limiters, and basic components.
Procedures for opening cabinets and connecting power and sensors.
Details advanced input/output options and external control interfaces.
Initial checks and system preparation steps.
Navigating the start-up wizard and initial settings.
Configuring various system parameters, accessories, and operating modes.
Managing alarms, checking performance, and post-adjustment procedures.
Overview of the display, buttons, and how to navigate menus.
Explanation of symbols appearing on the heat pump display.
Procedures for changing settings and using the help function.
Adjusting temperature, ventilation, scheduling, and heating curves.
Configuring hot water comfort, scheduling, and temporary increases.
Accessing system status, compressor data, alarms, and temperature logs.
Configuring operating modes, pool heating, holiday settings, and advanced parameters.
Accessing service functions, operating settings, system settings, and accessory configurations.
Procedures for servicing, inspections, and emergency mode.
Instructions for draining water heater, climate system, and brine.
Details on helping circulation pumps, temperature sensors, and removing modules.
Using USB for firmware updates, logging, and settings backup.
Handling alarms, using the info menu, and basic fault-finding.
Detailed steps for diagnosing and fixing common operational issues.
Lists available accessories and their part numbers.
Physical size and placement information.
Detailed technical data on output, electrical load, and system parameters.
Graphical representation of the compressor's working limits.
To Next Page
General
