Nibe F1345 Series User Manual

A
Accessories, 42
Assembly, 8
B
Brine side, 18
C
Cable lock, 24
Cold and hot water
Connecting the hot water heater, 20
Commissioning and adjusting, 35
Filling and venting, 35
Post adjustment and bleeding, 37
Preparations, 35
Start guide, 36
Connecting accessories, 34
Connecting current sensors, 27
Connecting external brine pump (60 kW only), 25
Connecting external operating voltage for the control
system, 25
Connecting the climate system, 20
Connecting the hot water heater, 20
Connections, 24
Controlling ground water pump, 33
Cooling mode indication, 33
Cooling section, 14
D
Delivery and handling, 8
Assembly, 8
Installation area, 9
Supplied components, 9
Transport, 8
Dimensions and pipe connections, 17
Dimensions and setting-out coordinates, 45
Docking alternatives, 21
E
Electrical connections, 23
Cable lock, 24
Connecting accessories, 34
Connecting external brine pump (60 kW only), 25
Connecting external operating voltage for the control
system, 25
Connections, 24
External connection options (AUX), 31
General, 23
Load monitor, 27
Master/Slave, 26
Miniature circuit-breaker, 23
Motor cut-out, 23
NIBE Uplink, 31
Optional connections, 26
Outdoor sensor, 25
Power connection, 24
Relay output for emergency mode, 30
Reversing valves, 31
Room sensor, 28
Shunt controlled additional heat, 29–30
Step controlled additional heat, 29
Temperature sensor, external flow line, 26
Temperature sensor, hot water charging, 25
Energy labelling
Data for energy efficiency of the package, 48
Information sheet, 48
Technical documentation, 49
External connection options
Possible selection for AUX inputs, 32
Possible selections for AUX output, 33
Temperature sensor, hot water top, 26
External connection options (AUX), 31
Control of ground water pump, 33
Cooling mode indication, 33
Extra circulation pump, 33
Hot water circulation, 33
Optional selection for AUX output (potential-free
variable relay), 33
Extra circulation pump, 33
F
Filling and venting, 35
Filling and venting the brine system, 35
Filling and venting the climate system, 35
Symbol key, 36
Filling and venting the brine system, 35
Filling and venting the climate system, 35
H
Heating medium side, 20
Connecting the climate system, 20
Hot water circulation, 33
I
Important information, 4
Recovery, 6
Safety information, 4
Inspection of the installation, 7
Installation area, 9
NIBE F1345Item register64
Item register

Nibe F1345 Series Specifications

General

Refrigerant	R410A
Control System	NIBE SMO 40
Max Flow Temperature	65°C
Cooling Capacity	Not explicitly stated in general specifications. Depends on the specific model and installation conditions.
COP	4.5
Electrical Connection	400V 3N~
EER (Cooling)	Not explicitly stated in general specifications. Depends on the specific model and installation conditions.
Number of Compressors	1 or 2 (depending on model)