Maintenance of F750
Regular checks
Your heat pump requires minimal maintenance after commissioning. On
the other hand, it is recommended that you check your installation regu-
larly.
If something unusual occurs, messages about the malfunction appear in
the display in the form of different alarm texts. See alarm management
on page 70.
Service hatch
Behind the service hatch are the safety valves, circulation pump etc. Remove
the hatch by pulling it towards you.
Cleaning the ventilation devices
The building’s ventilation devices should be
cleaned regularly with, for example, a small
brush to maintain the correct ventilation.
The device settings must not be changed.
NOTE
If you take down more than one ventilation
device for cleaning, do not mix them up.
NIBE™ F750Chapter 2 | The heat pump – the heart of the house22
To Next Page
Loading...
