In the menu scheduling indoor cli-
mate (heating/ventilation) is sched-
uled for each weekday.
You can also schedule a longer period
during a selected period (vacation) in
menu 4.7.
Menu
1.3
heating
Increases or decreases in the accommodation temperature can be sched-
uled here for up to three time periods per day. If a room sensor is installed
and activated the desired room temperature (°C) is set during the time
Menu
1.3.1
period. Without an activated room sensor the desired change is set (of
setting in menu 1.1). One step is usually enough to change the room
temperature by one degree, but in some cases several steps may be re-
quired.
Schedule: The schedule to be changed is selected here.
Activated: Scheduling for the selected period is activated here. Set times
are not affected at deactivation.
System: Which climate system the schedule is for is selected here. This
alternative is only displayed if more than one climate system is present.
35NIBE™ F750Chapter 3 | F750 – at your service
To Next Page
Loading...
