tariff periods, OPT10
tariff periods, electricity
tariff per, ext. shunt add
SMART ENERGY SOURCE 4.1.8
settings
set. price
tariff per, ext. step add
control method CO
2
smart energy source
settings 4.1.8.1
settings
set. price
CO2 impact*
tariff periods, electricity
tariff per, ext. shunt add
tariff per, ext. step add
The function prioritises how / to what
extent each docked energy source will
be used. Here you can choose if the
system is to use the energy source that
is cheapest at the time. You can also
choose if the system is to use the energy
source that is most carbon neutral at the
time.
*Select control method "CO
2
" under settings to open this menu.
SETTINGS
control method CO
2
smart energy source
settings 4.1.8.1
smart energy source™
Setting range: Off/On
Factory setting: Off
control method
Setting range: Price / CO
2
Factory setting: Price
Menu
4.1.8.1
SET. PRICE
Menu
4.1.8.2
NIBE VVM 225Chapter 3 | VVM 225 – at your service64