Nice E FIT M 817 BD

option – D
5
end
= 5 sec
5
Hold down both buttons... release them after 5
seconds;
count 5 movements.
A.4.2 - Procedure run with a transmitter which has not yet been memorised
NOTES AND WARNINGS
• In order to carry out the following procedures, a transmitter with a PRG button should be used.
1 2 3
 4
OFF
5
sec.
ON
Disconnect the elec-
trical power supply to
the motor.
Reconnect the electrical pow-
er supply to the motor once
again.
4 5 6
 7
NEW
= 5 sec
2
Hold down the button and; release them after 5 seconds;
< – – – – – – – – – – Within 10 seconds – – – – – – – – – – >
7 8 9 10
...
OFF
5
sec.
ON
Run procedure A.4.1.
in full.
Disconnect the elec-
trical power supply to
the motor.
Reconnect the electrical pow-
er supply to the motor once
again.
11 – English