To Next PageTo Next Page
Need help?Do you have a question about the Nice Max and is the answer not in the manual?
General| Brand | Nice |
|---|---|
| Model | Max |
| Category | Controller |
| Language | English |
Warnings about incorrect installation causing serious injury.
Important safety instructions for everyday use.
Covers roller diameter, cable management, protection, clearance, and avoiding damage.
Includes power cable, switch placement, movement safety, children, and maintenance checks.
Describes the Max Controller and Max Motor components.
Explains automation of roller shutters and awnings based on torque.
Details continuous operating time, heat protection, and limit switch function.
Ensure no polystyrene pieces are inside the Max Motor before installation.
Details inserting Max Controller, securing parts, and installing limit switch crown.
Covers engaging the driving wheel and measuring C-E distance.
Describes introducing the motor into the roller and securing it with screws.
Fixing the supporting bracket and connecting the Max Controller end.
Mentions control by "TTU" unit until final electrical connections.
Emphasizes using a single-pole mains disconnection device with a 3mm contact gap.
Details the wire colors (Brown, Black, Blue, Yellow-Green) and their functions.
Explains how to verify and change roller movement direction by inverting wires.
Explains the electromechanical limit switch system cutting power at limits.
Outlines adjusting "Up" and "Down" limits using screws based on roller position.
Details controlling motor to lift, noting screw direction, and adjusting for desired stop.
Selects the unused screw to adjust for the lowered stop position.
Controls motor to lower, notes screw direction, and adjusts for desired stop.
Troubleshooting steps if the motor doesn't move when connected to power.
Checks if heat protection has cut in and advises waiting for cooling.
Verifies mains power supply and voltage readings.
Checks if limit switches are correctly adjusted and connect simultaneously.
Refers to technical data on the label for voltage, frequency, current, power, torque, and speed.
Lists motor diameter, nominal operating time, protection class, operating temperature, and cable length.
Dismantling must be performed by qualified personnel after product lifecycle end.
Mentions product materials, recycling, and local disposal regulations.
Warns about potential polluting or hazardous substances in components.
Prohibits disposal in ordinary household waste, requiring sorting or retailer return.
Warns that local regulations may impose stiff penalties for wrongful disposal.
States manufacturer name, type, and model (Max).
Lists compliance with EU directives 73/23/EEC and 89/336/EEC.
Lists harmonised standards EN 60335-1, EN 60335-2-97, EN 61000-6-2, EN 61000-6-3.
Date and signature of the managing director.
Contact details for the main Nice S.p.A. office in Oderzo, Italy.
Lists contact details for various Nice branches worldwide.
