Nice UST1K-1.1kW User Manual

GB
English – 1
UST1K
Instructions and information for installation and use
T
he entire instruction manual is made up of instructions for using the motor and its control unit.
Automatic industrial door control unit
UST1K-1.1kW
UST1K-2.2kW
UST1K-5.5kW
Ni
c
e

Nice UST1K-1.1kW Specifications

General

Power Output	1.1 kW
Type	Controller
Voltage	230 V
Frequency	50/60 Hz
Phase	Single-phase
Weight	1.5 kg
Humidity	95% non-condensing

Summary

General Rules of Safety

Knowledge of the System and Preparation for Installation

Information on the system's purpose, applications, and responsibilities for installation and safety.

Control and Connection Elements

Single Phase Power Supply Cable Connection

Details on connecting single-phase power supply cables for UST1K models.

Connection of the Three-Phase Power Supply Cable

Instructions for connecting three-phase power supply cables using an EEC plug.

Limit Switch Setting

Explanation of how to connect opening and closing limit switches to the control unit.

Connection of the Transmitters of the OPEN, STOP, CLOSE Controls

Connection of an Optical Sensitive Edge

Details on connecting optical sensitive edges and their function with a preliminary limit switch.

Connection of a Resistive Sensitive Edge 8.2 ΚΩ

Guidance on connecting resistive or pneumatic sensitive edges with an 8.2 kOhm resistance.

Mechanical Limit Switch Setting

Determining the Lower Position of the Door

Mechanical Limit Switch Setting

Guidance on setting limit switches for large and small motors using contact cams.

Assembly - Setting

Setting of the Final Positions

Instructions for setting the upper and lower final positions using DIP switches and buttons.

Precision Adjustment of the Upper and/or Lower Final Position

Wiring Diagram UST1K-1.1kW

Wiring Diagram UST1K - Starting from 2.2kW

Electronic Board UST1K-1.1kW

Electronic Board UST1K - 2.2kW and 5.5kW