English – 15
SDEL 0.37-24
SDEL 0.37-20
SDEL 0.55-20
DIMENSIONED DRAWINGS OF GEARMOTORS FOR
SECTIONAL DOORS
Gearmotor with interlocking
release
Only with the 0.55-20 gearmotors
Hollow shaft diameter: 25.4 or 31.75 mm.
When assembling gearmotors with 31.75 mm
diameter shaft from the left, the tab is to be blocked
only with a fixing ring because using a screw could
break the shaft.
To Next Page
Loading...
