English – 19
The gearmotor is totally assembled and wired, ready for the
connection. To avoid any damages it is to be transported, and if
necessary stored, inside the packaging provided for this purpose or
another that is similar with equal characteristics.
For disposal, it is necessary to separate
− metals
− plastic elements
− electrical components
− lubricants.
TRANSPORT / STORAGE / DISPOSAL
TECHNICAL ASSISTANCE / SPARE PARTS /
ACCESSORIES
We specifically clarify that we neither carry out tests nor are we willing
to approve any spare parts and/or accessories not supplied by us.
The assembly and/or the use of products of this type could therefore
compromise any predefined characteristics at the construction
design level, or reflect on safety.
NICE declines all liability and disclaims any warranty whatsoever
for damages, if any, caused by non-original spare parts and/or
accessories.
Defects that cannot be remedied internally are to be eliminated only
by the Door manufacturer or another specialised Company, from
which it is possible to also request any necessary spare parts.
The possible combinations of gearmotors with control stations are indicated hereunder. The gearmotors can work only with the allowed
control stations.
The entire instruction manual is made up of instructions for use regarding the gearmotor and its control station. To this
regard it is necessary to follow the instructions of the control station. All gearmotors for sectional doors can operate also
with a static frequency converter. To this regard, observe the advice of the Manufacturer.
COMBINATION OF GEARMOTORS FOR SECTIONAL DOORS AND CONTROL STATIONS
Combination
Control Stations
Gearmotors (for
sectional main doors
SDL-0.37-20-KU
SDEL-0.37-20
SDL-0.37-20-KE
SDL-0.37-20-KE2
SWL 0.20-20-KU
SWL 0.20-20-KE
SWEL 0.20-20
SDL-0.37-24-KU
SDEL-0.37-24
SDL-0.37-24-KE
SDL-0.37-24-KE2
SDL-0.55-20-KU
SDEL-0.55-20
SDL-0.55-20-KE
SDL-0.55-20-KE2
UST2
X X X
UST1
XXXX
UST1K-2,2 / 5,5kW
XXXX
UST1K-1,1kW
XXXX
To Next Page
Loading...
Need help?
General
