2
2.1) Components and accessories
The pack contains the parts indicated in Figure 1 and described in Table 1.
The TTP programmer is a logic unit designed by Nice to simplify the
operations of installation, commissioning and maintenance of
motors and control units. By means of TTBUS communication, TTP
makes it possible to perform the procedures normally carried out
with the remote control rapidly and intuitively. Any other type of use
is improper and forbidden.
The prime function of the programmer is to act directly on the
motors/control units in which the operating parameters and radio
controls are memorised. Other, accessory functions are also avail-
able, such as the possibility of reading the configuration of a
motor/control unit (parameters and/or radio controls) in order to
copy them into one or more other motors/control units.
1) Warnings
This manual relates to the TTP programming unit. When using the TTP,
bear in mind that connection to different types of motors/control units
may give rise to certain differences in the execution of the programming
procedures; for further details, consult the appropriate technical sched-
ules, which are also available at the site www.niceforyou.com.
Have repairs and maintenance work carried out by competent technical
personnel.
2) Product description
1
1. TTP palm-top programmer
2. Motor connection cable
Table 1 Parts list
TTPA1 rechargeable battery kit consisting of:
• Pair of type AA 2000mAh Ni-MH batteries
• 12V DC 300mA battery charger power supply unit
Optional accessories
To Next Page
Loading...
Need help?
General