To Next PageTo Next Page
Need help?Do you have a question about the Nice TTP and is the answer not in the manual?
General| Brand | Nice |
|---|---|
| Model | TTP |
| Category | Motherboard |
| Language | English |
Details the Nice TTP programmer, its purpose, and primary functions for motor control.
Lists the parts included in the TTP programmer pack and optional accessories available.
Details how to connect the TTP programmer to motors or control units via TTBUS connection.
Explains the function of each key on the TTP programmer keypad.
Describes the meaning of the LED lights on the TTP programmer for status feedback.
How to switch the TTP on/off and search for connected motors.
Procedure for the TTP to detect and connect to a motor.
Using keys to control UP, DOWN, and STOP movements of the motor.
How to set or change the motor's direction of movement.
Procedure to cancel the previously programmed motor direction.
Setting the upper (0) and lower (1) limit positions for motor operation.
Step-by-step guide to manually set the 0, 1, and intermediate positions.
Automatic detection and setting of limit positions 0 and 1.
How to remove previously stored motor positions.
Enabling or disabling the torque reduction function on compatible motors.
Configuring intervention thresholds for wind and sun sensors.
Setting the motor's response direction when rain is detected.
Activating or deactivating automated sun and rain sensor systems.
Restoring factory settings by clearing all programmed motor parameters.
Procedures for entering and cancelling radio controls for the motor.
Retrieving motor parameters and radio controls into TTP memory.
Transferring TTP memory data to a motor.
Clearing parameters stored within the TTP programmer's memory.
Instructions for battery replacement and recharging for the TTP programmer.
Guidelines for responsible disposal of batteries and the product.
Detailed specifications of the TTP programmer, including power, temperature, and dimensions.
