Niceboy VEGA - Connectivity and Power Management; Battery Charging Procedures; Wi-Fi Phone Connectivity

24
Recommendation: regularly format the memory card on a PC to avoid video writing errors. For more informa-
tion about using or formatting memory cards, contact the manufacturer of the SD card.
BATTERY/CHARGING
Toinsertorremovethebattery,openthecoveronthecamera’sunderside(pressthebuttononthe
coverandextendthecover).ChargethecamerabyconnectingtheenclosedUSBcabletotheUSBport
()ontheleftsideofthecameraandconnectingtheotherendtoachargingadapter,e.g.fromamobile
phone(5Vvoltageandminimumcurrentof1A).ThecameracanalsobechargedbyconnectingtheUSB
cabletoaPCorapowerbank.
Attention: fully charge the battery before rst use. Do not subject the camera to large temperature swings. Keep
the battery and camera under watch during charging. Charge time is dependent on the output current of the
charging adapter.
CONNECTING THE CAMERA TO A PHONE VIA WI-FI
InstallYUTUPRO(forfree)ontoyourphone(availableintheAppStoreforiOSandGooglePlayforAn-
droid).Donotstarttheapplicationrightafterinstallingitandfollowtheseinstructions:
1. TurntheWi-Fiinthecameraon
2 OpentheWi-Fisettingsonyourmobilephoneandconnecttothecamera’snetwork(login:Niceboy,
password:12345678).
3 Onceconnectedtothecamera’snetworkviayourmobilephone,launchtheapplicationandstart
controllingthecamerafromyourphone.
Attention: Before using the application, enable all the permissions for the application in the phone’s settings,
turn o “data connection” on the phone and leave only Wi-Fi turned on. The application is compatible with
mobile phones with iOS 9.0 and later or with Android 8.0 and later.