SOLAR CHARGE CONTROLLER
2
FIRST AND FOREMOST
Thank you for choosing our product!
Please read this manual carefully and be familiar with the details of the product
before using this product. The product is designed to be used under specific
conditions. If you are unsure of whether or not the product can be used in a certain
way, Please contact us (E-mail:xlspower@126.com). We strongly discourage the
alteration or modification of this product. We will not assume responsibility for any
consequences that result from modification of the products. If you need to alter or
modify the product, please contact us for further information.
This manual is for the assembly of the PSCC-20 solar charge controller. You can
choose to read the instructions depending on the model you purchased.
TECHNICAL SPECIFICATIONS
12V System <25V/24V System <50V
Rechargeable Battery Type/Code
Lead-acid batteries /BAT/b01
PRODUCT FEATURES
1. Built-in industrial microcontroller.
2. Large LCD display, Adjustable charge and discharge parameters.
3. Full 3-level PWM charging management.
4. Built-in short circuit protection, open circuit protection, reverses protection,
overload protection.
5. Dual MOSFET reverse current protection, low heat dissipation.
To Next Page
Loading...