Need help?Do you have a question about the Nidac DT1 and is the answer not in the manual?
General| Brand | Nidac |
|---|---|
| Model | DT1 |
| Category | Conference System |
| Language | English |
Initial self-test sequence upon power application, indicated on the 7-segment display.
How the DT1 triggers from alarm sources and how the key switch cancels calls or disables the input.
Process of seizing the line, dialling, playing messages, and handling attempts.
Specifies voltage and current requirements for the power supply.
Details the RJ12 socket and supplied lead for phone line connection.
Selectable dialling modes: Decadic (pulse) or DTMF (tone).
Physical size of the dialler unit.
Details the function of +12, GND, K/S, and CH1 terminals for power and inputs.
Illustrates connecting high-driving and low-driving outputs to the DT1.
Explains the structure for entering data, including memory numbers and codes.
Details the memory numbers (1-9) for programming phone numbers, modes, and messages.
Guide for programming telephone numbers, including pauses and DTMF tones.
Selection between Decadic (pulse) and DTMF (tone) dialling methods.
Codes and causes for errors during data entry and programming.
Error code 5 indicating no phone numbers are programmed in the dialler.
To Next Page