TROUBLESHOOTING
The following are general checkpoints; please call your local
Shimpo representative or contact Shimpo Instruments directly for
further assistance.
No laser beam is evident:
• Confirm that power switch is functioning
• Confirm that batteries are functioning and that polarity
is correct
Inaccurate measurement results:
• If the surface being measured is highly reflective, it may
need to be painted a darker color in order to ensure reliable
results
• Beam may not be hitting the reflective tape, or taped
area may be too small
• Measuring distance may be too short (unit must be at
least 5” from intended mark)
DIMENSIONS AND SPECIFICATIONS
1.91”
(48.5 mm)
6” Circumference Wheel
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Previous Page
Loading...
