Nidec TNP-0.5 Operation Manual

15
Clearing Stored Data
There are two types of memory clear available on the TNP torque meter.
• Single memory clear
• Clear all memory
Single Memory Clear
Single clear refers to erasing the stored data manually from the torque tester. The
erase process starts from the most recent to the very first data stored.
Clearing data that is within the set cannot be accomplished by a
single memory clear. The TNP does not allow the user to select the
memory to be deleted. (jump out of sequence).
How does it work?
First select from Open or Close Modes (Mean or average mode data cannot be
stored).
Press the Recall key to access memory, the first display you see will indicate the
number of data stored in the torque tester and the last value saved.
Example from the picture above shows 3 data is saved (003) and the last value is
12.6. Pressing the Zero/RST button, the last data is eliminated (CLr will appear
on the screen). Pressing the Zero/RST button again deletes the next data stored
in the TNP torque meter.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Nidec TNP-0.5 Specifications

General

Brand	Nidec
Model	TNP-0.5
Category	Measuring Instruments
Language	English