Nieco MPB94 - Page 21

21
Nieco Corporation - Model MPB94
Slide the feeder cover towards you until it comes
off.
Wash, rinse, and sanitize in the 3-compartment
sink.
Feeder Cover - P/N 17066
F
eed End
Tools
Instructions
3-Compartment Sink
Clean: Every 4 hours
1.
2.
Pull the release pin.
Lift push bar and wire belt feeder bases up and off.
Wash, rinse, and sanitize in the 3-compartment
sink.
DO NOT lift the feeder base by the feeder bar or the
chains. This will damage the feeder base.
REASSEMBLY: Pull the release pin and place feeder
base in position.
Push Bar/Wire Belt Feeder Base - P/N 17410
Feed End
Tools
Instructions
3-Compartment Sink
Clean: Every 4 hours
1.
2.
3.
!
S
crub Pad
Scrub Pad