nifty Heightrider HR17N

Need help?

Do you have a question about the nifty Heightrider HR17N and is the answer not in the manual?

Summary

1 Introduction and General Information

1.1 FOREWORD

Manual purpose, importance of reading and understanding.

Safety Alert Definitions

Definitions of safety alert levels and symbols used in the manual.

1.2 SCOPE AND SERIES INTRODUCTION

1.2 SCOPE

Defines the scope of the operating instructions and references technical manuals.

1.3 INTRODUCING THE HEIGHT RIDER SELF-PROPELLED (SP) SERIES

Introduces the Niftylift Height Rider SP series and provides contact information.

1.4 GENERAL SPECIFICATION

1.5 IDENTIFICATION (UK PLATE)

1.5 a IDENTIFICATION (USA PLATE)

1.6 EC DECLARATION OF CONFORMITY

2 Safety

2.1 MANDATORY PRECAUTIONS

Outlines essential safety rules, operator responsibilities, and pre-use checks.

Manufacturers Responsibility Disclaimer

Manufacturer has no direct control over application; user is responsible for safety.

2.1 MANDATORY PRECAUTIONS (Continued)

Hazardous Substances and Operational Limits

Warnings on hazardous substances, capacity, electrical conductors, and wind loading.

Platform Usage and Safety Gear

Mandatory safety gear, platform standing rules, and prohibited actions.

2.1 MANDATORY PRECAUTIONS (Continued)

Safe Operation and Hazard Avoidance

Checks area, stunt driving, vehicle proximity, elevated driving, grades, and atmosphere hazards.

Machine Failure and Emergency Descent

Procedures for machine failure, manual pump use, and emergency descent recovery.

2.1 MANDATORY PRECAUTIONS & ENVIRONMENTAL LIMITATIONS

Storage and Security Precautions

Stowing booms, leaving keys, fuel safety, and preventing unauthorized use.

2.2 ENVIRONMENTAL LIMITATIONS

Details operational temperature ranges, wind speed limits, and electrical storm warnings.

2.3 NOISE AND VIBRATION; 2.4 TEST REPORT

2.3 NOISE AND VIBRATION

Specifies noise emission levels and vibration exposure for operators.

2.4 TEST REPORT

Describes the testing procedures applied to Niftylift machines.

3 Preparation and Inspection

3.1 UNPACKING and Initial Checks

Procedures for unpacking the machine and initial checks by dealer/owner.

3.2 PREPARATION FOR USE

Emphasizes mandatory pre-use inspection and understanding the manual.

3.3 PRE-OPERATIONAL SAFETY CHECK SCHEDULES

3.3.1 DAILY SAFETY CHECKS

Lists daily visual and functional checks required before operating the machine.

3.3.2 WEEKLY SAFETY CHECKS

Lists weekly safety checks for tires, joysticks, fluids, and hoses.

3.3 PRE-OPERATIONAL SAFETY CHECK SCHEDULES (Continued)

3.3.3 MONTHLY SAFETY CHECKS

Lists monthly checks including engine oil, wheel nuts, and slew worm.

3.3.4 ANNUAL SAFETY CHECKS

Lists annual checks for pivot pins, cracks, hydraulic filters, and slew ring bolts.

3.4 PLACARD, DECALS & INSTALLATION (UK SPEC)

3.5 TORQUE REQUIREMENTS

4 Operation

4.1 CONTROL CIRCUIT COMPONENTS

Describes key electrical and control system components like PLC, Tilt Alarm, and Sounder.

4.1.1 GROUND CONTROLS

Details the components and functions of the ground control station.

4.1 CONTROL CIRCUIT COMPONENTS (Continued)

4.1.2 PLATFORM CONTROL STATION

Details the Platform PLC, Digital Gauge, and Load Sensing Console (SIOPS).

4.1.3 CHASSIS COMPONENTS

Describes chassis components like Motion Control Valve, Battery Management, and Isolator.

4.1 CONTROL CIRCUIT COMPONENTS (Continued)

4.1.4 FUSES & TRIP SWITCHES

Lists fuse ratings and locations for chassis, ground, and platform controls.

4.2 GROUND CONTROL OPERATION

4.2.1 GROUND CONTROL FUNCTIONS

Explains the functions of indicators and controls on the ground control panel.

4.2 GROUND CONTROL OPERATION (Continued)

4.2.2 OPERATION

Details the steps for operating the machine from the ground controls.

Ground Control Emergency Procedures

Outlines emergency procedures for ground control operation using a manual hand pump.

4.3 PLATFORM CONTROL OPERATION

4.3.1 PLATFORM CONTROL FUNCTIONS

Describes platform controls like speed selector, rotation, horn, and joystick.

4.3 PLATFORM CONTROL OPERATION (Continued)

4.3.2 MULTI-FUNCTION DIGITAL GAUGE

Explains the information displayed on the digital gauge in the cage.

4.3 PLATFORM CONTROL OPERATION (Continued)

4.3.3 INFORMATION ICONS

Explains safety critical and advisory icons displayed on the digital gauge.

4.3.4 PLATFORM OPERATION

4.3.5 SIOPST - LOAD SENSING CONSOLE

4.4 DRIVING CONTROLS

4.5 CAGE WEIGH SYSTEM

4.5.1 LOAD CELL VERSION

Explains the load cell technology used in the cage weigh system.

4.5.2 CALIBRATION AND MAINTENANCE

Details calibration and maintenance requirements for the cage weigh system.

4.6 BATTERIES AND CHARGING

4.6 BATTERIES AND CHARGING (Continued)

CHARGING LIMITATIONS

Specifies limitations for charging, including power supply and temperature.

4.6 BATTERIES AND CHARGING (Continued)

BATTERY TOPPING UP

Instructions for topping up battery electrolyte levels and associated safety.

4.7 TRANSPORTING AND STORAGE

4.7.1 TRANSPORTING

Procedures and precautions for transporting the Niftylift.

4.7 TOWING AND CRANEAGE

4.7.2 TOWING

Instructions and precautions for towing the Niftylift, including gearbox disengagement.

4.7.3 CRANEAGE

Guidelines for lifting the Niftylift using a crane.

4.7 STORAGE AND SETTING TO WORK

4.7.4 STORAGE

Recommendations for storing the machine when not in use.

4.7.5 SETTING TO WORK

Procedures for preparing the machine for use after storage or transport.

5 Emergency Controls

5.1 GENERAL EMERGENCY CHECKS

Emphasizes the importance of checking emergency controls daily or per shift.

5.2 INCAPACITATED OPERATOR PROCEDURES

Procedures for operating the machine using ground controls if the operator is incapacitated.

5.3 MACHINE FAILURE AND MANUAL PUMP OPERATION

Explains using the manual hand pump in case of machine failure or overload.

6 Responsibilities

6.1 CHANGES IN OWNERSHIP

Outlines responsibilities when ownership of the Niftylift changes.

6.2 MANUAL OF RESPONSIBILITIES (USA)

Refers to ANSI/SIA requirements for operators in the USA.

6.3 INSPECTION;SERVICE;PRE-HIRE CHECK LIST

Appendix A Fault Codes