To Next PageTo Next Page
Need help?Do you have a question about the nifty Heightrider HR21 and is the answer not in the manual?
General| Maximum Working Height | 20.8 m |
|---|---|
| Weight | 6, 640 kg |
| Drive Type | 4 x 4 |
| Working Outreach | 13 m |
| Machine Width | 2.27 m |
| Platform Height | 18.8 m |
| Power Source | Diesel |
Manual purpose and importance of reading and understanding safety instructions.
Defines hazard levels (Danger, Warning, Caution) and explains safety alert symbols.
Details the content of the operating instructions and refers to workshop manuals.
Overview of the articulated boom platform's design, capabilities, and versatility.
Key technical specifications including working height, outreach, capacity, and power source.
Details on the UK manufacturer's identification plate and its contents.
Details on the USA manufacturer's identification plate and its contents.
Typical EC Declaration of Conformity statement for machine compliance with directives.
Essential safety rules and operator responsibilities for safe machine operation.
Specifies operating temperature ranges and wind speed limitations for the machine.
Information on airborne noise emissions and operator vibration levels.
Details the comprehensive testing procedures for machine safety and stability.
Guidelines for safe unpacking and initial inspection of the machine upon delivery.
Mandatory systematic inspection before putting the aerial platform into service.
Daily, weekly, monthly, and annual safety checks to ensure machine integrity.
List of placards, decals, and their installation details for the UK specification.
List of placards, decals, and their installation details for the USA specification.
Specifications for tightening torques for various fasteners and components.
Description of key control circuit components like tilt alarm, sounder, and drive control valve.
Instructions for operating the machine from the ground control station.
Instructions for operating the machine from the platform control station.
Details on using the drive speed selector, joystick, and steering controls.
Functionality and indicators of the load sensing cage weigh system.
Procedures and precautions for recharging the machine's batteries.
Guidelines for safe transport, lifting, storage, and putting the machine into service.
Importance of checking emergency controls daily and before each shift.
Procedures for operating the machine if the operator becomes incapacitated.
Using the manual hand pump for hydraulic power during machine failure.
Using ground controls and hand pump to maneuver the machine during emergency descent.
Steps for safely towing the Niftylift, including gearbox disengagement and steer override.
Mandatory requirement to report accidents or incidents involving the Niftylift.
Seller's responsibility to notify Niftylift of ownership changes for future bulletins.
User requirement to read and understand responsibilities as per ANSI/SIA 92.2 1990.
Comprehensive checklist for pre-hire inspection, service, and maintenance.
