09
Warnings
1. In case of printer failure, please follow the prompt for the
corresponding operation.
2. If water enters into the printer, please turn off the power
immediately.
3. There are special protection circuits and devices inside the
battery. Please do not disassemble the battery without
authorization, otherwise, it may cause a short circuit or electrolyte
leakage. If the electrolyte gets into your eyes, please rinse
immediately with water and seek medical attention.
4. Please use an original power adapter to charge the battery in
a cool and ventilated room. Do not expose the battery or the
power adapter to high temperatures or high humidity, or put
them in water, so as to avoid short circuits, which may cause
the battery to heat, smoke, deform, damage or even explode. If
the power adapter comes into contact with water or other
liquids, disconnect the power immediately. If you discover
smoke or an unpleasant odor coming from the printer or power
adapter, please immediately unplug the power adapter and pay
attention to avoid burns.
6. Do not use the printer near flammable objects such as in gas
stations and fuel warehouses.
17 · 18
To Next Page
Loading...
