8
R2-D2™ Skype Web Cam
Parts Identifi cation and Function
R2-D2 (Web camera)
Power switch: Switches
power ON/Standby/OFF.
(Refer to “Turn on R2-D2
Power” on page 41)
Camera: CMOS sensor.
LED indicator: Lit in blue when
the power is on.
¯
It turns red when the battery is
low.
Speaker: R2-D2 voice
comes out of this speaker.
Fall prevention sensor: The sensor to prevent R2-D2 from falling off
the table edge, etc.
This sensor may detect unevenness of the path and avoid the fall (by
pausing or turning around).
Battery cover
Battery cover stopper button:
Press this button to open the
battery cover.
MIC
¯ Please note that the fall prevention sensor cannot always detect
difference in surface level.
To Next Page
Loading...