NIKKORMAT FT2 - ACCESSORIES; Lens Hoods; Filters

ACGES$ORIES
Lens
Hoods
The
use
of a
lens
hood
is
recommended
at all times
to
prevent
extraneous
light
from striking
the
lens surface
and causing
flare or
ghost,
and
as
an
added
measure
of
protection
against
damage
to
the
lens.
Nikon
lens
hoods come
in
four tyPes' depending
on
the
lens:
Screw-In,
Snap-On,
Slip-On
and Built-In.
They
are
calculated
precisely
for each
focalJength Nikkor
lens
to provide
maximu*
ptirt".tion
against
stray
light.
To
attach
or
remove the
snap-on
hood,
first depress
the spring
latch-which
ig"marked
with
an arrow-and
slide
it in the
direction
of
the
arrow.
The
hood will
also
fit
directly
over a
screw-in
filter, so both
can be
used
on
a
lens at the
same
time.
When
not
in use,
the
snap-on
hood
can
be
reversed
for storage
on
the
lens,
".rd
the
lens
and
its
hood can
be
stored
together
in
the eveready
case.
Filters
Nikon
filters are
made
of
optical glass,
ground
and
polished
so
that
both
surfaces
are
optically
flat and
parallel.
Nikkor
lenses and
Nikon
filters are
made
for each
other.
For best
results,
use
Nikon
filters
on
Nikkor
lenses. The
filters are
available
in both
screw-in
and
series
mounts, depending
on
the
lens.
www.orphancameras.com